Sunday 15 June 2008

Stone set ripple

This scrap of silver sheet carries echoes of previous work. The jigsaw bump (promontory? tab?) came from a very unsuccessful brooch. The silver from inside that polygon went on to be the back of my penannular bottle glass brooch. I've now used some of the remaining sheet for two bezel settings. The smaller one is for my puffin pendant. The other one is for a stone set ripple pendant.


I soldered the finished bezel setting to the very first ripple I made.


Then set the stone, which is 8 mm in diameter. The ripple is 45 mm long. This photo was taken after the first few pushes of the pusher.


I had taken more care to ensure that the top of the bezel was flat this time, and I think the setting is neater than my earlier efforts. This is a pleasing result, and I may try again with thicker wire. I think that it fits in well with the rest of the Ripple Suite.

2 comments:

Mariana said...

Great idea with the stones!!! colorful! it adds something... niiiice!

breezily said...

Thanks! I've got a few more variations in mind too.