Friday 25 January 2008

Tumbling bottle glass


This tutorial describes how I converted glass from a sherry bottle into pieces resembling sea or beach glass, to be used for jewellery making. The bottle was a blue Harveys Bristol Cream sherry bottle.

I used this rock tumbler, which I usually use for sanding polymer clay beads. (You'll find advice on that application, from Desiree McCrorey, here). The tumbler is sold as a child’s rock tumbler, and is predominantly made from plastic. Mine was purchased from the Science Museum Shop. Another, similar toy is here. For tumbling rocks the machine needs to run for several days, and I suspect that it really makes too much noise to be left on all night without disturbing the neighbours. Fortunately, less time is required for tumbling glass, this task can be achieved during waking hours.


The tumbler was supplied with several packets of abrasive grit for use with rocks. I used the coarsest grade for tumbling my bottle glass.


Here are the steps involved in the process:

1. Empty the bottle and rinse it out with water

2. Put on safety glasses and gloves (I used leather gardening gloves)

3. Wrap the bottle in a tea towel that you don't mind getting torn.


4. Take the wrapped bottle outdoors, together with a household hammer

5. Find a suitably hard surface, hold the bottle neck (still wearing gloves and eye protection) and use the hammer to smash the bottle inside the towel. I found that the edge of my concrete doorstep was a suitable surface, and that the hammer worked best when applied to the shoulder of the bottle. The hammer bounced off other parts of the bottle.


6. Check to see how large the fragments are. Hammer those that are too big, keeping them inside the towel. Some people suggest using tile snippers to form the pieces into the desired shape, but I did not manage to do this successfully.


7. Carefully transfer the fragments from the towel into a storage container.


8. Still wearing gloves, select several pieces for tumbling and weigh them. My load weighed about 150 g.

9. Put the glass in the barrel of the tumbler, add water to just cover the glass then add the abrasive. The maximum my tumbler can tumble at a time is 225 g, so as I had about 150 g I decided to use only half of the sachet of abrasive. Close the barrel tightly and start the tumbler.


10. Tumble for several hours, then check on progress. I tumbled for 10 hours, checked progress, than ran for 2 more hours (12 hours in total). Rinse and dry a piece of glass to be sure that you are assessing progress correctly.


11. When tumbling is completed to your satisfaction, empty the contents of the barrel into a colander held over a bucket, and rinse well. Dispose of the grit that is now in the bucket - but not into the drains! I added mine to a flower bed. Do not use the colander for food after this. Nor indeed the bucket.


12. Clean out the barrel thoroughly so that there is no danger of spoiling any items later tumbled in the barrel.


13. Make something pretty using your tumbled bottle glass!


Please do leave a comment about this tutorial. For example ask a question if these instructions need clarification, post a link if you make any tumbled bottle glass of your own, or add your own experiences with tumbling glass.

12 comments:

Anonymous said...

Thank you so much for this, I am not about to smash a bottle but I have collected kilos of beach glass along the Enlish coastline, and much of it had not had long enough in the sea to become jewellery ready. some in fact were raw glass. I wondered how I could use my rock tumbler to smooth them. now I know! thanks a lot.
Jan Miller
www.janmillerdesign.co.uk

breezily said...

Good luck with your tumbling! I'm so pleased you found this useful.

Janofmn said...

I thought I would try my hand at making sea glass or glass tumbling. I must be doing something wrong. I've had my glass in the tumbler for 2 weeks and it doesn't look any different. I am using coarse sand and water as a mixture in my tumbler. I guess i need to know how much of each do i need in there? Do I cover the glass with the mixture? It just looks like a gritty chocolate shake. Looking forward to hearing your suggestions. Thanks so much.
Jan

desiree said...

> I've had my glass in the tumbler
> for 2 weeks and it doesn't look
> any different.

Sounds like things are just sloshing inside the tumbler; they're not actually tumbling.

I'd recommend you start by carefully reading your tumbler instructions about the amount of water, grit, how much to fill up the tumbler, etc.

It's critical to maintaining a proper tumbling environment.

Minya, Warrior Seamstress said...

When is a fragment too small to tumble? Is there an ideal size?

Geri said...

Great article and thanks for the photos. I am just starting to tumble some glass. i bought a tumbler at a garage sale-a child's, unused. I wanted to see if I can recycle picture frame glass. It may be too thin..we'll see.

Rita said...

Great how-to article- thanks. How do you recommend drilling holes in the tumbled glass?

The Beading Gem said...

Thanks for the tutorial! I'm going to try it out. BTW I will link in a future blog post. Pearl

Wendy said...

I'm going to give this a go---my kids broke an amber glass vintage lamp, and I can't bear to throw the glass out! Luckily, I bought a tumbler a few weeks back, and hubby is a mason. Wish me luck...
Wendy
www.etsy.com/shop/alwaysgreener
https://www.facebook.com/#!/pages/Always-Greener/192180670819526

Rovin said...

Hi,loved the video on glass tumbling,I have loads of blue bottles and am going to see if I can score them with a glass cutter and then gentle break them and hopefully have pices of the same size for earings and pendants to match,I to have a Lortone Tumbler (I love it) Have you ever tumbled Sea Hearts(Sea Beans)I have some and would like to polish them for Jewellery as well.Thanks for all the info and will keep on enjoying this site
Rose at rovin79g@hotmail.com

Mixed Kreations said...

Wow! This s cool, I'm going to try this. I've never thoughtbof tumbling glass like this. Maybe i will have better luck tumbing glass then i do with polymer clay. Now I want to go break something (-;
Thanks

Unknown said...

Can you re-use your grit?